Description
Turns your Foredom into a power chisel carver. Comes with wrench and a set of 6 pre-sharpened steel chisels (#FORAKHK550). Uses Foredom stainless steel cutters or flexcut cutters. Foredom's Chisel Handpiece is designed to give a power assist to carving projects in all types of wood, plastic, plaster and soft carving stone. The No. 50 is a reciprocating 'hammer' type handpiece that requires a lightn pressure to engage the hammering chisel action. It attaches in the same manner to any Foredom or other flex shaft with a standard key tip shaft.
The Chisel Handpiece is recommended for use with the 1/3 HP Series TX or 1/6 HP Series SR motors in forward rotation only. It reaches optimum performance when used between 3,000 - 10,000 rpm, maximum operating speed 18,000. Use of a bench top dial speed control, in place of a foot pedal is recommended, to run steady within the recommended speed range.
This is a very comfortable and useful tool! 22 individual chisels and 5 chisel sets are available.
Chisel Handpiece must be used only in the forward motor direction.
The Chisel Handpiece is recommended for use with the 1/3 HP Series TX or 1/6 HP Series SR motors in forward rotation only. It reaches optimum performance when used between 3,000 - 10,000 rpm, maximum operating speed 18,000. Use of a bench top dial speed control, in place of a foot pedal is recommended, to run steady within the recommended speed range.
This is a very comfortable and useful tool! 22 individual chisels and 5 chisel sets are available.
Chisel Handpiece must be used only in the forward motor direction.